Quote:
Originally Posted by tara99
I filmed my candle and a blue beam comes out of it, ? my camera was on night mode but this deep blue beam was coming out the top , i had other candles but there was no blue beam coming out from them,???? is this spirit or a camera thing x
|
Got a mixed reponse when searching the net there is answer in both science and metaphysics (metaphysics - Presence of a deceased family member or some spirit)
Science:
Flame
color depends on several factors, the most important typically being
blackbody radiation and
spectral band emission, with both
spectral line emission and spectral line absorption playing smaller roles. In the most common type of flame,
hydrocarbon flames, the most important factor determining color is oxygen supply and the extent of fuel-oxygen pre-mixing, which determines the
rate of combustion and thus the temperature and reaction paths, thereby producing different color hues.
In a
laboratory under normal
gravity conditions and with a closed oxygen valve, a
Bunsen burner burns with yellow flame (also called a safety flame) at around 1,000 °C (1,800 °F). This is due to
incandescence of very fine
soot particles that are produced in the flame. With increasing oxygen supply, less blackbody-radiating soot is produced due to a more complete combustion and the reaction creates enough energy to excite and
ionize gas molecules in the flame, leading to a blue appearance
Different flame types of a
Bunsen burner depend on oxygen supply. On the left a rich fuel with no premixed oxygen produces a yellow sooty diffusion flame; on the right a lean fully oxygen premixed flame produces no soot and the flame color is produced by molecular radicals, especially CH and C2
band emission. The purple color is an artifact of the photographic process[
citation needed]